Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Frequency of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Replacement of oil in the engine and an oil filter
   2.10. Care of the battery
   2.11. Check of the cooling system
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and details of a body
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of half shafts
   2.23. Zolotnik of ventilation of a case
   2.24. The filtering element of the air filter
   2.25. Belts of the drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, runner and cover of the distributor
   2.33. Care of the cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Replacement of liquid in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Valve check of system of recirculation
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





2.7. Check of level of liquid in automatic transmission

GENERAL INFORMATION

Probe of automatic transmission

The probe of automatic transmission (it is specified by an arrow) is in back part of a motor compartment.

Marks for check of level of transmission liquid

 
1. Normal level (for cold liquid)
2. Normal level (for hot liquid)

Level has to is between shooters.

Check

PERFORMANCE ORDER
1. Insufficient or excess level of liquid in automatic transmission leads to a unit exit out of operation.
2. Level should be checked after a trip in the usual mode for distance 16 km (at warm weather) that liquid got warm up to the working temperature (not less than 60-70 °C). After a long trip, or a trip with big loading wait not less than 30 min.
3. Install the car on an equal horizontal platform, turn on the emergency brake, start the engine and press a brake pedal. Translate the lever of the selector from situation P through all range and again put in situation P.
4. Get the control probe from a branch pipe (the engine continues to idle), wipe the probe.
5. Again insert the probe into a branch pipe.
6. Get the probe and check liquid level. Level has to be in the range the designated Hot (hot). On cold transmission level has to be in Cold range (cold). If it is necessary to add liquid, accurately pour in necessary amount of liquid of the corresponding brand through a branch pipe.
7. To add liquid through a funnel in the small portions (the amount of liquid between marks of Hot makes about 0,57 l.
8. If liquid of black color, or possesses a "burned" smell, liquid should be replaced (see subsection 2.35).