Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Frequency of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Replacement of oil in the engine and an oil filter
   2.10. Care of the battery
   2.11. Check of the cooling system
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and details of a body
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of half shafts
   2.23. Zolotnik of ventilation of a case
   2.24. The filtering element of the air filter
   2.25. Belts of the drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, runner and cover of the distributor
   2.33. Care of the cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Replacement of liquid in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Valve check of system of recirculation
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





2.23. Zolotnik of ventilation of a case

Check and replacement

PERFORMANCE ORDER
1. The zolotnik of ventilation of a case is located in a cover of a head of cylinders.
2. On the heated-up engine idling get a zolotnik together with a hose from a cover of a head of cylinders or the soaking-up collector.
3. Muffle a finger a zolotnik or press a hose. If depression it is not felt, check purity of a hose, opening in a collector, or a zolotnik. Replace the polluted or failed detail.
4. Stop the engine and shake a zolotnik. If knock is not listened, replace a zolotnik. For this purpose disconnect a hose and dress it on a new zolotnik. At acquisition of a zolotnik it is necessary to consider that the new zolotnik in accuracy corresponded to make of the car and the engine (compare a new zolotnik with replaced).
5. Believe a condition of all hoses and a sealant. In case of anguishes and hardening replace.
6. Insert a zolotnik into place.