Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Frequency of maintenance and types of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of a steering
   2.9. Replacement of oil in the engine and an oil filter
   2.10. Care of the battery
   2.11. Check of the cooling system
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, steering and details of a body
   2.17. Check of an exhaust system
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of half shafts
   2.23. Zolotnik of ventilation of a case
   2.24. The filtering element of the air filter
   2.25. Belts of the drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, runner and cover of the distributor
   2.33. Care of the cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Replacement of liquid in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Valve check of system of recirculation
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





2.1. Specifications

GENERAL INFORMATION

The recommended viscosity of oil for the engine in various ranges of temperature

1. Hot weather
2. For petrol engines
3. Labels by which be guided,
getting oil
4. Cold weather

Arrangement of cylinders, direction of rotation of the distributor operating procedure of the 4-cylinder engine

1. 2,7 l of 1998.
2. 2,7 l of 1994-97.

Arrangement of cylinders on V6 engines with a volume of 3,4 l


The recommended lubricants and liquids

Oil for the engine
API SG or SJ engine oil
Viscosity
Cooling liquid
Antifreeze on the basis of ethylene glycol in mix with the distilled water
Liquid of a hydraulic actuator of brakes
DOT3
Coupling hydraulic actuator
DOT3
Liquid for the power steering
Liquid of automatic transmission of Dexron II
Automatic transmission
Liquid for automatic transmission of Dexron type II
Manual transmission
API GL-4 or GL-5 SAE 75W-90
Transfer case
API GL-4 or GL-5 SAE 75W-90
Reducer of the back bridge:
The forward
Gipoidny API GL-5 SAE 75W-90 oil
The back:
  – it is above 30 °C
Gipoidny API GL-5 SAE 90 oil
  – to 30 °C
Gipoidny API GL-5 SAE 80W-90 oil
Greasing of details of a suspension bracket, running gear and body
Litol (NLGI N2)

Filling capacities and/m "Toyota 4 Runner/Hilux/Surf" (l)

Oil for the engine (taking into account the capacity of an oil filter):
  – 4-cylinder (2,7l)
6,5
  – V6 (3,4 l)
6,2
The cooling system of cars with the 4-cylinder engine (2WD and 4WD):
  – with a back heater
13,2
  – without back heater
12,1
With the V6 engine:
  – with a back heater
13,2
  – without back heater
12,1
Cars 2WD and 4WD with the V6 engine:
  – with a back heater
10,8
  – without back heater
9,3
Automatic transmission (the merged and filled volume)
1,9 (2WD) and 2,4 (4WD)
Manual transmission:
  – on 4-cylinder engines
3,1
  – on V6, 2,6 (2WD) engines
3,1 (4WD)
Transfer case
1,35
Forward (back) reducer
Forward reducer:
  – with automatic inclusion of the forward bridge through the left half shaft (with ADD system)
1,35
  – with a self-locking nave
1,35
Back reducer:
  – cars 2WD
3,3
  – cars 4WD:
     • with self-locking differential
3,3
     • with usual differential
3,0
Type of spark plugs and gap between electrodes:
On 4-cylinder engines:
  – type 1
Nippondenso K16R-U or equivalent, gap of 0,78 mm
  – type 2
NGK BKR5EYA or equivalent, gap of 0,78 mm
On V6 engines:
  – type 1
Nippondenso K16TR-11 or equivalent, gap of 1,1 mm
  – type 2
NGK BKR5EYA or equivalent, gap of 1,1 mm
Idling turns:
  – on 4-cylinder engines
650 – 750 rpm
  – on V6 engines
650 – 750 rpm

Prevention

If the data specified on the podkapotny plate differ, be guided by data of the plate.


Direction of rotation of the roller of the distributor and operating procedure of cylinders:
  – on 4-cylinder engines (cm. rice. Arrangement of cylinders, direction of rotation of the distributor operating procedure of the 4-cylinder engine):
     • operating procedure
1–3–4–2
     • direction of rotation
counterclockwise
  – on V6 engines with a volume of 3,4 l the distributor is absent, an operating procedure
Gap in valves (mm):
  – 4-cylinder engines (on the cold engine)
     • for inlet valves
0,18 – 0,23
     • for the final
0,25 – 0,33
  – l V6 3,4 engines (on the cold engine)
     • for inlet valves
0,16 – 0,23
     • for the final
0,28 – 0,35
Coupling pedal (in mm):
  – height
171 – 183
  – free wheeling
5 – 15
Brakes (in mm):
Limit thickness of frictional overlays of disk and drum brakes
1,6
Pedal:
  – height
158 – 168 (till 1996), 161 – 171 (since 1997)
  – free wheeling
0,3 – 0,6
Number of clicks of the emergency brake before full braking
7 – 9
Suspension bracket and steering (mm):
  – side play of a steering wheel
no more than 40
  – side play of spherical support
0

Inhaling moments (N. of m)

Bolts of fastening of the pallet of automatic transmission
6
Drain stopper of the pallet of automatic transmission
24
Traffic jams of a transfer case
30
Traffic jams of reducers
44
Spark plugs
24
Drain stopper of the pallet of the engine
24
Nuts of wheels
103