Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   - 7.3. Cardan shaft and cardan hinges
      7.3.1. Check of driveshafts
      7.3.2. Removal and installation of the driveshaft
      7.3.3. Replacement of cardan hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and half shaft of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward half shafts
   7.9. Replacement of covers and dismantling of the CV JOINT
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





7.3.1. Check of driveshafts

PERFORMANCE ORDER
1. Lift the car.
2. Examine driveshafts. In the presence of dents, cracks and deformations replace a shaft.
3. At detection of traces of a leak about transmission, a transfer case or a reducer(s) replace epiploons.
4. Check rotation of a wheel the noise proceeding from hinges. Believe a side play of hinges, trying to rotate a flange and a shaft diversely. Any notable side play indicates strong wear of hinges.
5. Check an inhaling of bolts of fastening of hinges.
6. Check greasing leaks from under the sliding connections.
7. Check a condition of half shafts, CV JOINTS and covers. Traces of a leak indicate replacements of epiploons the need.