Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Cardan shaft and cardan hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and half shaft of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward half shafts
   7.9. Replacement of covers and dismantling of the CV JOINT
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

7.7. Zadny Bridge

Removal and installation

PERFORMANCE ORDER

1. Lift back part of the car and establish supports under a body. Remove back wheels.
2. Prop up the cart with a jack the back bridge under a reducer case.
3. Disconnect the driveshaft from a reducer.
4. Disconnect from the bridge a spring of the dosing perepuskny valve (see subsection 8.10)
	5. Disconnect and muffle hoses and tubes of brakes.
6. Remove back brake drums.
7. Disconnect a cable of the emergency brake.
8. Disconnect a hose of a sapun.
9. Disconnect and squeeze shock-absorbers.
10. Disconnect from a body a stabilizer cross-piece, cross and longitudinal bars.
11. Carefully lower the back bridge.
12. Installation of the bridge is carried out upside-down.
13. Pump over brakes (see subsection 8.14).