Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car


Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Cardan shaft and cardan hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and half shaft of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward half shafts
   7.9. Replacement of covers and dismantling of the CV JOINT
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





7.1. Specifications
GENERAL INFORMATION

Distance from a pedal to a body floor and a free wheeling of a pedal (see subsection 2.28).
Resistance of a winding of the blocking electric drive of differential (ADD)
37 – 47 Ohms
Limit distance from a surface of a frictional slip to heads of rivets of a disk
0,75 mm
Adjusting length of a half shaft
490 – 531 mm

Inhaling moment (N. of m)

Coupling
Nuts of fastening of the main cylinder
10,8
Bolts of fastening of coupling to a flywheel
17
Bolts of fastening of the working cylinder
10,8
The union for pumping
9,6
Driveshaft
Bolts and nuts of a flange of the driveshaft
Forward shaft (cars 4WD)
66
Back shaft (cars 2WD/4WD)
66
Bolts of fastening of an arm of an average support to a body
32
Nut of an intermediate shaft
1st stage
163
2nd stage
To turn off on 1 turn
3rd stage
74
Nut of a nave of a forward half shaft (cars 4WD)
75
Zadny Bridge
Nuts of fastening of a board of a brake to a beam flange
58
Bolts of the blocking electric drive of differential (ADD)
18