Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. System of ignition
   11.4. Ignition coil(s)
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11.10. Generator
   11.11. System of start-up of the engine
   + 11.12. Starter electric motor
   11.13. Traction relay
   11.14. Check of tension
   11.15. Detection of short circuit
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. Finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crossing points
   11.22. Breakers
   11.23. Relay
   11.24. Breaker of indexes of turn / alarm system
   11.25. Switch of indexes of turn
   11.26. Lock of ignition and drum of the lock
   11.27. Switch of external lighting
   11.28. Screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. Headlight case
   11.32. Replacement of lamps
   11.33. Receiver and loudspeakers
   11.34. Antenna
   + 11.35. Screen wiper electric motor
   11.36. Switch of heating of back glass
   11.37. Heater of back glass
   11.38. Guard of devices
   11.39. Sound signal
   11.40. Electric drive of mirrors
   11.41. Cruise control
   + 11.42. Window regulator electric drive
   11.43. Electric drive of door locks
   11.44. Safety cushions
+ 12. Electroschemes

11.4. Ignition coil(s)

GENERAL INFORMATION

Coils of ignition of the V6 3,4 engine of l

1. High-voltage wire
2. Socket
3. Coil

4. Air hose of the power steering
5. Air duct
6. Air hose

Ignition coils on the l V6 3,4 engine

Coils are specified by shooters.

Check and replacement

PERFORMANCE ORDER

Contactless system of ignition
1. Disconnect the battery from weight.
	2. Unscrew screws (are specified by shooters).
	3. Remove a thermal guard of the coil.
	4. Turn off nuts (are specified by shooters) contacts.
	5. Check resistance of primary chain of the coil (between (+) and (-) coil conclusions).
	6. Check resistance of a secondary chain of the coil (between (+) and (-) coil conclusions).
7. If both resistance differ from standard, replace the coil of ignition.
8. For replacement designate and disconnect wires.
	9. Turn off bolts (are specified by shooters).
	10. Get the coil from the distributor case.
11. Installation is carried out upside-down.
DIS system
12. Transfer a key ignition to the situation Off, disconnect sockets from coils.
	13. Check resistance of primary chain of the coil.
	14. Check resistance of a secondary chain of the coil.
15. If resistance differ from standard, replace the coil of ignition.
16. For replacement designate and disconnect all sockets from the coil.
	17. Turn off bolts and remove the coil.
18. Installation is carried out upside-down.