Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. System of ignition
   11.4. Ignition coil(s)
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11.10. Generator
   11.11. System of start-up of the engine
   + 11.12. Starter electric motor
   11.13. Traction relay
   11.14. Check of tension
   11.15. Detection of short circuit
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. Finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crossing points
   11.22. Breakers
   11.23. Relay
   11.24. Breaker of indexes of turn / alarm system
   11.25. Switch of indexes of turn
   11.26. Lock of ignition and drum of the lock
   11.27. Switch of external lighting
   11.28. Screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. Headlight case
   11.32. Replacement of lamps
   11.33. Receiver and loudspeakers
   11.34. Antenna
   + 11.35. Screen wiper electric motor
   11.36. Switch of heating of back glass
   11.37. Heater of back glass
   11.38. Guard of devices
   11.39. Sound signal
   11.40. Electric drive of mirrors
   11.41. Cruise control
   + 11.42. Window regulator electric drive
   11.43. Electric drive of door locks
   11.44. Safety cushions
+ 12. Electroschemes

11.32. Replacement of lamps

PERFORMANCE ORDER

1. Disconnect the battery from weight.
Lamps of lateral indexes of turn
	2. Unscrew the top screw of fastening of the index.
3. Get the case of the index of turn and disconnect the socket.
	4. Turn the holder of a lamp counterclockwise and get from the case.
	5. Pull and get a lamp.
6. The lamp is established upside-down.
Lamps of frontal indexes of turn
7. For convenience lift a car front (optional to carry out). Find the index of turn from the back party of a bumper.
	8. Turn the holder counterclockwise and remove.
Prevention On part of cars it can be necessary to remove glass and to get a lamp from the forward party of the index.
9. Get a lamp, having turned it counterclockwise.
10. The lamp is established upside-down.
Lamps of a signal of braking, back lamps and back indexes of turn
	11. Remove a plafond of a back lamp (shooters specified screws of fastening of a plafond of a back lamp).
12. Lamps of a signal of braking and back indexes of turn, back get by their turn counterclockwise.
Prevention For replacement of these lamps it is necessary to shoot the case of a back lamp with parts of cars and to get them from the back party.
	13. To remove a lamp of a signal of a backing it is necessary to take a partition.
	14. To remove a back lamp disconnect the socket and remove a lamp.
15. Lamps and a lamp are established upside-down.
Lamp of illumination of registration plate
16. Unscrew screws of fastening of a plafond and get a lamp, having pulled on themselves.
17. The lamp is established upside-down.
Lamp of illumination of the panel of a heater
18. Remove facing of the control panel a heater and the conditioner.
	19. Get a faulty lamp of illumination of the panel of a heater.
20. Establish a lamp upside-down.
Lamps of illumination of a guard of devices
21. Remove a guard of devices.
	22. Get a lamp, having turned it counterclockwise and get a lamp from the holder, having pulled on themselves.
23. Establish a lamp and a guard upside-down.