Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car


Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. System of ignition
   11.4. Ignition coil(s)
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11.10. Generator
   11.11. System of start-up of the engine
   + 11.12. Starter electric motor
   11.13. Traction relay
   11.14. Check of tension
   11.15. Detection of short circuit
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. Finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crossing points
   11.22. Breakers
   11.23. Relay
   11.24. Breaker of indexes of turn / alarm system
   11.25. Switch of indexes of turn
   11.26. Lock of ignition and drum of the lock
   11.27. Switch of external lighting
   11.28. Screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. Headlight case
   11.32. Replacement of lamps
   11.33. Receiver and loudspeakers
   11.34. Antenna
   + 11.35. Screen wiper electric motor
   11.36. Switch of heating of back glass
   11.37. Heater of back glass
   11.38. Guard of devices
   11.39. Sound signal
   11.40. Electric drive of mirrors
   11.41. Cruise control
   + 11.42. Window regulator electric drive
   11.43. Electric drive of door locks
   11.44. Safety cushions
+ 12. Electroschemes





11.33. Receiver and loudspeakers

 RECEIVER

Removal and installation
PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the central panel of forward facing of salon (see subsection 10.23).
3. Turn off bolts of fastening of the receiver (are specified by shooters) and give the receiver on yourself, disconnect the antenna plug.
4. Disconnect the socket of wires and remove the receiver.
5. Install the receiver upside-down.

LOUDSPEAKERS

Removal and installation
PERFORMANCE ORDER
1. Remove the facing panel of a door.
2. Unscrew screws of fastening and disconnect sockets.
3. For removal of the door loudspeaker of the audio system unscrew fastening screws (are specified by shooters), give the loudspeaker and disconnect the socket.
4. For removal of the door loudspeaker of the sound alarm system disconnect the socket and unscrew screws (are specified by shooters).
5. Install loudspeakers upside-down.