Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. Suspension bracket and steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. Stabilizer of a forward suspension bracket
   9.4. Rotary fist
   9.5. Forward nave and bearing
   9.6. Spherical support
   9.7. Top lever
   9.8. Lower lever
   9.9. Back shock-absorbers
   9.10. Back stabilizer of cross stability
   9.11. Cross bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. Steering wheel
   9.15. Tip of steering drafts
   9.16. Cover of the steering mechanism
   9.17. Steering mechanism
   9.18. Pump of the hydraulic booster
   9.19. Power steering
   9.20. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes


cvv2 buy



9.11. Cross bar of the back bridge

Removal and installation

PERFORMANCE ORDER
1. Lift back part of the car.
2. Establish supports under a bridge beam.
3. Disconnect the regulator of pressure of brakes from the bridge.
4. Disconnect a bar from a frame arm (the arrow specified a fastening nut).
5. Disconnect a bar from an arm of the back bridge (the arrow specified a fastening nut).
6. Remove a bar.
7. Installation is carried out upside-down.
8. Finally to tighten nuts of fastening of a bar only after lowering of the car