Repair and operation of the TOYOTA 4-RUNNER car - 9.3. Stabilizer of a forward suspension bracket//Toyota 4ranner 1987-1998 /

Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. Suspension bracket and steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. Stabilizer of a forward suspension bracket
   9.4. Rotary fist
   9.5. Forward nave and bearing
   9.6. Spherical support
   9.7. Top lever
   9.8. Lower lever
   9.9. Back shock-absorbers
   9.10. Back stabilizer of cross stability
   9.11. Cross bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. Steering wheel
   9.15. Tip of steering drafts
   9.16. Cover of the steering mechanism
   9.17. Steering mechanism
   9.18. Pump of the hydraulic booster
   9.19. Power steering
   9.20. Corners of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





9.3. Stabilizer of a forward suspension bracket

Removal and installation

PERFORMANCE ORDER
1. Lift a car front.
2. Turn off nuts (are specified by shooters) drafts of the stabilizer.
3. Turn off bolts (nuts) (are specified by shooters) collars of plugs.
4. Remove the stabilizer.
5. Remove stabilizer plugs.
6. Check a condition of plugs, replace the damaged plugs.
7. Cuts on new plugs at assembly have to be turned towards forward part of the car.
8. Assembly is carried out upside-down.