Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
- 8. Brake system
8.1. Specifications
8.2. ABS system
8.3. Blocks of disk brakes
8.4. Brake support
8.5. Brake disk
8.6. Blocks of drum brakes
8.7. Wheel cylinder of back brakes
8.8. Main cylinder of brakes
8.9. Hoses and tubes of a hydraulic actuator
8.10. Pressure regulator
8.11. Emergency brake
8.12. Cables of the emergency brake
8.13. Vacuum amplifier of brakes
8.14. Pumping of brakes
8.15. Adjustment of a pedal of a brake
8.16. Braking signal switch
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
|
| Braking signal switch gap |
0,4 – 2,4
|
| Free wheeling of a pedal of a brake |
3 – 6
|
| Height of the released pedal |
156 – 171
|
| Height of the pressed pedal |
not less than 72
|
| Initial height of a spring of the regulator of pressure (dosing and the perepuskny valve) |
220
|
| Adjusting gap From the lever of the emergency brake |
0,4 – 0,78
|
| Gap between a pusher of the amplifier of brakes and the piston of the main cylinder |
0
|
| Distance And the regulator of pressure of brakes (is defined by length of a spring of sounding of loading) |
223
|
| Disk brakes
|
| Limit thickness of slips |
|
| Disk beating |
no more than 0,08 mm
|
| Limit thickness of a disk |
it is cast on a disk
|
| Drum brakes
|
| Limit thickness of slips |
|
| Limit diameter of a drum |
it is cast on a disk
|
Inhaling moments (N. of m)
| Bolt of the ring union of a hose of a brake |
27
|
| Hairpins, fingers and bolts of a support |
110
|
| Bolts of the torsion plate of a support (on rear-wheel and/m) |
98
|
| Bolts of dosing pressure regulator valve |
10,8
|
| Nuts of the main cylinder |
10,8
|
| Nuts of the amplifier of brakes |
12
|
| Bolts of the wheel cylinder |
8,4
|
|
|