Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
- 8. Brake system
   8.1. Specifications
   8.2. ABS system
   8.3. Blocks of disk brakes
   8.4. Brake support
   8.5. Brake disk
   8.6. Blocks of drum brakes
   8.7. Wheel cylinder of back brakes
   8.8. Main cylinder of brakes
   8.9. Hoses and tubes of a hydraulic actuator
   8.10. Pressure regulator
   8.11. Emergency brake
   8.12. Cables of the emergency brake
   8.13. Vacuum amplifier of brakes
   8.14. Pumping of brakes
   8.15. Adjustment of a pedal of a brake
   8.16. Braking signal switch
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





8.7. Wheel cylinder of back brakes

GENERAL INFORMATION

Prevention

Cylinders change only in couple on an axis, it is forbidden to change them separately.


Removal and installation

PERFORMANCE ORDER
1. Remove drums and blocks.
2. Unscrew the hydraulic actuator tube union, muffle a tube and an opening in the cylinder (And – the brake tube union, In – bolts of the wheel cylinder).
3. Turn off bolts and remove the cylinder.
4. Installation is carried out upside-down. Pump over a hydraulic actuator of brakes and remove air.