Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. 4-cylinder engines
   - 3.2. V6 3,0 engines of l (1993-1994) and 3,4 l (since 1995)
      3.2.1. Specifications
      3.2.2. The types of repair which are carried out without removal of the engine from the car
      3.2.3. Installation of the piston of the 1st cylinder in compression step VMT
      3.2.4. Covers of heads of cylinders
      3.2.5. The soaking-up collector
      3.2.6. Final collectors
      3.2.7. Belt of an asterisk of cam-shafts
      3.2.8. Forward epiploon of the crankshaft
      3.2.9. Epiploons of cam-shafts
      3.2.10. Cam-shafts and pushers
      3.2.11. Heads of cylinders
      3.2.12. Oil pallet
      3.2.13. Oil pump
      3.2.14. Flywheel (leading disk of the hydrotransformer)
      3.2.15. Back epiploon of the crankshaft
      3.2.16. Engine mount details
   + 3.3. Dismantle and capital repairs of the engine
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





3.2. V6 3,0 engines of l (1993-1994) and 3,4 l (since 1995)

GENERAL INFORMATION

Engines V-shaped 6-cylinder verkhneklapanny, it is the share of 1 head on 3 cylinders.

Engines of 3,0 l 12-valvate, were installed on cars of 1993-1994. On these engines there are 2 cam-shafts (on 1 on each head). Each cam-shaft operates 6 valves (3 inlet and 3 final).

DOHC engines of 3,4 l – 24-valvate, are installed on cars since 1995. On these engines 4 cam-shafts are provided (on 2 on each head).

In the real subsection types of repair of the specified engines without removal from the car are described.