Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
- 1. Maintenance instruction
   1.2. Dashboard
   1.3. The combined devices
   1.4. Designation of symbols of light indexes
   1.5. Keys
   1.6. System of an immobilizer (recognition of a code of start-up of the engine)
   + 1.7. Doors
   1.8. Cover of a fuel tank
   1.9. Adjustment of a forward seat
   1.10. Adjustment of an inclination of a steering wheel
   1.11. Adjustment of provision of a rear-view mirror
   1.12. Plafond of internal lighting
   1.13. Plafond of individual lighting
   1.14. Cleaner and washer of a windshield
   1.15. Cleaner and washer of back glass
   + 1.16. Headlights and indexes of turn
   1.17. Heater of back glass
   1.18. Index of a reserve of fuel
   1.19. The remote thermometer of the cooling means
   1.20. Oil pressure measuring instrument
   1.21. Voltmeter
   1.22. Tachometer
   1.23. Counter of the general run and counter of daily run
   + 1.24. Indexes and the warning signals
   1.25. Lock of ignition and lock of a steering column
   1.26. Automatic box
   1.27. The AM-UKV radio receiver with electronic control
   1.28. The AM-VHF-radio tape recorder with electronic control
   1.29. Adjustment of the direction of a stream of air
   1.30. Governing bodies of a heater
   1.31. Hours
   1.32. Lighter and ashtray
   1.33. Glove box
   1.34. The container for trifles
   - 1.35. Actions at refusal of start-up of the engine
      1.35.1. Start of the engine in case of overflow of the cylinder gasoline
      1.35.2. Removal of air from fuel system
      1.35.3. Start-up of the engine in the emergency conditions
      1.35.4. Start from the additional battery
      1.35.5. If the engine decayed during the movement
      1.35.6. Actions at a wheel puncture
   1.36. Identification numbers of the car
   1.37. Identification number
   1.38. Manufacturer's certificate of origin
   1.39. VECI label
   1.40. Numbers on transmission units
   1.41. Car raising jack
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





1.35.1. Start of the engine in case of overflow of the cylinder gasoline

GENERAL INFORMATION

In case of refusal at start-up cylinders of the engine can be overflowed with gasoline because of repetition of unsuccessful attempts of start-up.

On engines 4E-FE, 4A-FE, 7A-FE

Turn the ignition key in the situation START and press a pedal of a butterfly valve. Hold a key and a pedal no more than 15 sec. then release. Then take away a foot from a pedal and repeat start.

On model 2E engines

Press a pedal of a butterfly valve and hold 15–20 sec. Then try to start the engine, without taking away a foot from a pedal. It is not allowed to press a pedal, she should be held only at a floor.

If the engine is not started after 15 sec. of work of a starter, switch off a starter, wait some minutes then repeat attempt.

In case of refusal start of engines of models 4E-FE, 4A-FE and 7A-FE repair or adjustment is required.

In case of refusal start-up of the 2E engine execute the procedure described above and test the following.

PERFORMANCE ORDER
1. Turn out candles and dry electrodes.
2. Turn the ignition key in the situation START and press a pedal of a butterfly valve. Hold a key and a pedal no more than 15 sec. then release.
3. Wrap spark plugs.
4. Having taken away a foot from a pedal, try to start the engine.
5. If the engine is not started, adjustment or repair is necessary.