Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. Mechanical transmission
   - 6.2. Automatic transmission
      6.2.1. Specifications
      6.2.2. Transmission diagnostics
      6.2.3. Gate drive cable
      6.2.4. Draft of transmission
      6.2.5. The blocking switch
      6.2.6. System of fixing of transfers
      6.2.7. Lever of change of transfers
      6.2.8. Removal and installation of transmission
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





6.2.7. Lever of change of transfers

Removal and installation

PERFORMANCE ORDER
1. Remove the top panel of back section and the control panel a back heater (see subsection 4.10).

2. On all-wheel drive cars without selector of a forward reducer (2) remove the handle of the lever of a transfer case. On cars with the selector of a forward reducer unscrew the screw and remove the handle of the lever of a transfer case. Remove the top panel of forward section. On cars with the selector of a forward reducer (1) disconnect the selector socket. Disconnect 2 latches, unscrew screws and remove a box of forward section.
3. Lift the car.
4. Turn off a nut and remove a washer, disconnect a rod from the lever.
5. Disconnect the socket, turn off bolts and remove the lever.
6. Assembly is carried out upside-down. Tighten a nut of a rod with the set moment.