Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car


Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Systems of heating, ventilation
   4.1. Specifications
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydrocoupling
   4.5. Radiator and tank
   4.6. Oil cooler
   + 4.7. Pump
   4.8. Liquid temperature sensor
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   4.11. Control panel conditioning block
   + 4.12. Central air
   4.13. Compressor
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





4.10. Heater radiator
GENERAL INFORMATION

Forward heater

 1. Radiator

2. Ventilating channel

3. Case

4. Tubes

Back heater
1. Forward seats
2. Back central section
3. Back heater
4, 6. Case
5. Radiator
7. Relay		 8. Wires
9. Resistor
10. Electric motor
11. Krylchatka
12. Back air duct
13. Control panel
Prevention

For access to the back block of conditioning it is necessary to remove both seats.

Removal and installation

PERFORMANCE ORDER
1. Merge liquid.
2. Disconnect and muffle heater hoses on a partition of a motor compartment.
3. Remove the central section, facing of a box for trifles, an ashtray, the receiver and the forward panel (see subsection 10.23). Remove an intensifying framework of the forward panel.
4. Disconnect governing bodies of the conditioning block.
5. Disconnect the socket and take aside the processor block.
6. Disconnect cables from a heater.
7. Remove the average ventilating channel.
8. Remove the lower ventilating channel.
9. Unscrew screws of fastening of tubes to a heater.
10. Get a radiator for what give the block as much as possible on yourself and disconnect all disturbing details.
11. Assembly is carried out upside-down.