Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
+ 6.1. Mechanical transmission
- 6.2. Automatic transmission
6.2.1. Specifications
6.2.2. Transmission diagnostics
6.2.3. Gate drive cable
6.2.4. Draft of transmission
6.2.5. The blocking switch
6.2.6. System of fixing of transfers
6.2.7. Lever of change of transfers
6.2.8. Removal and installation of transmission
+ 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes
|
Details of system of fixing of transfers
1. Solenoid of blocking of a key
2. Braking signal switch
3, 8. Processor block of system of fixing |
4, 6. Fixing solenoid
5, 7. Trailer switch |
Check and replacement of details
| PERFORMANCE ORDER |
| 1. Remove the lower left facing panel and facing of a wheel (see subsection 10.23). |
| 2. Find details of system of fixing (see rice. Details of system of fixing of transfers). |
| Transfer clamp solenoid |
| 3. Disconnect the socket from the solenoid. |
|
4. Measure resistance between the specified conclusions. If resistance does not meet standard, or at a zapityvaniye of conclusions there is no click, replace the solenoid. |
| Solenoid of blocking of a key |
| 5. Disconnect the socket from the solenoid. |
|
6. Measure resistance between the specified conclusions. If resistance does not meet standard, or at a zapityvaniye of conclusions there is no click, replace the solenoid. |
| Trailer switch |
| 7. Disconnect the socket from the switch. |
| |
8. Measure resistance between the specified conclusions. If the chain between the specified conclusions is absent, replace the switch. |
|
The table for check of the trailer switch
|
Position of the selector
|
The checked conclusions
|
Preset value
|
|
1P
|
P1 – P
|
The closed chain
|
|
2P
|
P1 – P
|
The closed chain
|
|
7 – 1
|
|
P2 – P
|
|
R, N, D, 2, L
|
P2 – P
|
The closed chain
|
|
|