Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
- 5. Fuel and exhaust systems
   5.1. Specifications
   5.2. Order of a decompression of fuel system
   + 5.3. Fuel pump and pressure of fuel
   5.4. Hoses and connections
   5.5. Fuel tank
   5.6. Fuel pump
   5.7. Fuel level sensor
   5.8. Air filter
   5.9. Cable of a butterfly valve
   + 5.10. System of electronic injection of fuel (EFI system)
   - 5.11. Units of system of injection of fuel
      5.11.1. Case of a butterfly valve
      5.11.2. Fuel pressure regulator
      5.11.3. Idling regulator (IAC valve)
      5.11.4. Distributor of fuel and nozzle
      5.11.5. Leveling chamber
   5.12. Service of an exhaust system
   + 5.13. System of decrease in toxicity of exhaust gases
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes

5.11.2. Fuel pressure regulator

GENERAL INFORMATION

Bolts of the regulator and hoses (4-cylinder engine)

1. Pressure regulator
2. Return hose

3. Ring
4. The operating vacuum hose

Pressure regulator on the V6 engine

1. Ring
2. Pressure regulator

3. Return hose
4. Burn down conductings

Check

See subsection 5.3.3.

Replacement

PERFORMANCE ORDER

1. Execute a decompression and disconnect the battery from weight.

2. Disconnect a vacuum hose from the regulator.

3. Disconnect the return fuel hose from the regulator, having pressed it.

4. Turn off bolts of fastening of the regulator of pressure of fuel and remove the regulator.

5. Installation is carried out upside-down. Replace ring laying.