Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car


Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
- 5. Fuel and exhaust systems
   5.1. Specifications
   5.2. Order of a decompression of fuel system
   + 5.3. Fuel pump and pressure of fuel
   5.4. Hoses and connections
   5.5. Fuel tank
   5.6. Fuel pump
   5.7. Fuel level sensor
   5.8. Air filter
   5.9. Cable of a butterfly valve
   + 5.10. System of electronic injection of fuel (EFI system)
   + 5.11. Units of system of injection of fuel
   5.12. Service of an exhaust system
   + 5.13. System of decrease in toxicity of exhaust gases
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes





5.6. Fuel pump
GENERAL INFORMATION

Fuel pump and adjacent details
1. Arm
2. Laying
3. Hose
4. Pump
5. Filter
6. Spring ring 		7. Pillow
8. Socket flange
9. Socket
10. Laying
11. Wire
12. Index of level of fuel

Removal

PERFORMANCE ORDER
1. Execute a decompression.
2. Disconnect the battery from weight.
3. Remove a fuel tank.
4. Disconnect the socket and tubes of a fuel pipe from a naos.
5. Turn off bolts and having inclined, carefully get the pump assembled with the sensor.
6. Release the lower part of the pump from an arm.
7. Remove laying, a pillow, get a spring ring and remove the filter.
8. Check a condition of the filter. if necessary replace.

Installation

PERFORMANCE ORDER
1. Collect the pump and establish upside-down.
2. If the pump changes, remove a collar and disconnect the pump from a hose.