Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
- 10. Body
   10.1. Maintenance and repair of a body
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of the lock of a cowl and cable
   10.10. Forward lattice
   10.11. Bumpers
   10.12. Facing panel of a door
   10.13. External mirror
   10.14. Door
   10.15. Forward wing
   10.16. Door of a cargo compartment
   10.17. Glass of a door of a cargo compartment and window regulator
   + 10.18. Glasses of doors
   10.19. Window regulator
   10.20. Lock clamp, switch of the lock and door handles
   10.21. Casing of a steering column
   10.22. Central floor section
   10.23. Panels of forward facing of salon
   10.24. Panel of forward facing of salon
   10.25. Air inlet lattice
   10.26. Seats
+ 11. Electric equipment
+ 12. Electroschemes

buy viagra on line no prec usa

10.24. Panel of forward facing of salon

Removal and installation

1. Disconnect the battery from weight.
2. Disconnect a safety cushion (see subsection 11.44).
3. Remove a wheel.
4. Remove a casing of a steering column and all facing panels of forward part of salon.
5. Remove the control panel the konditsioirovaniye block.
6. Remove the receiver and a guard of devices.
7. Designate and disconnect sockets.
8. Remove air ducts of N1 and N4.
9. Get a cover (And) in ceiling part of a glove box and disconnect the socket of the passenger airbag (if it is provided). Turn off box bolts (In).
10. Turn off a nut and 2 bolts of fastening of the panel of forward facing of salon.
11. Disconnect latches about a window and remove the panel.
12. Installation is carried out upside-down.