Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
- 10. Body
   10.1. Maintenance and repair of a body
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of the lock of a cowl and cable
   10.10. Forward lattice
   10.11. Bumpers
   10.12. Facing panel of a door
   10.13. External mirror
   10.14. Door
   10.15. Forward wing
   10.16. Door of a cargo compartment
   10.17. Glass of a door of a cargo compartment and window regulator
   + 10.18. Glasses of doors
   10.19. Window regulator
   10.20. Lock clamp, switch of the lock and door handles
   10.21. Casing of a steering column
   10.22. Central floor section
   10.23. Panels of forward facing of salon
   10.24. Panel of forward facing of salon
   10.25. Air inlet lattice
   10.26. Seats
+ 11. Electric equipment
+ 12. Electroschemes





10.16. Door of a cargo compartment

Removal, installation and adjustment


Prevention

Works are performed together.


PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Open a door of a compartment and reliably fix.
3. To remove racks of a door of a cargo compartment, turn off top (a photo at the left) and the lower bolts (a photo on the right).
4. To disconnect sockets of wires of a door, get a sealant.
5. Outline contours of loops on a door and turn off bolts (are specified by shooters).
6. Installation is carried out upside-down.
7. If it is necessary to replace the door lock, remove the facing panel, a cover of a service opening, a glass fringing, a window regulator and directing (see subsection 10.17).
8. For removal of a pusher turn off 2 nuts.
9. Remove a pusher and draft of remote opening of a door.
10. The overlay of a niche of registration plate fastens a nut and 5 latches.
11. Turn off a nut and remove a slip, having hooked a scraper.
12. Turn off nuts and remove the lock switch, disconnect the socket.
13. Then find draft of the lock and disconnect a cable then disconnect draft.
14. Turn off 3 bolts (are specified by shooters) and remove the lock.
15. Installation is carried out upside-down.
16. For adjustment of a door in the direction release nuts of fastening of loops to a body "back-forward".
17. In easy blows displace a loop in the necessary direction and tighten nuts.
18. For adjustment of a door in the directions "to the left-to the right" and "up-down" release bolts of fastening of loops to a door, displace a door in the necessary direction and tighten bolts.
19. For adjustment of a clamp of the lock release screws (are specified by shooters).
20. In easy blows displace a clamp before normal gearing with a clamp.
21. Tighten screws.
22. Installation is carried out upside-down.