Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. Mechanical transmission
   + 6.2. Automatic transmission
   - 6.3. Transfer case
      6.3.1. Specifications
      6.3.2. Epiploons of forward and back flanges
      6.3.3. Box lever
      - 6.3.4. Electromagnetic switch (selector) of a forward axis
         6.3.4.1. The switch on the handle of the lever of a transfer case
         6.3.4.2. Aktyuator
         6.3.4.3. Speed sensor
         6.3.4.4. Control lamp
      6.3.5. Removal and installation of a transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electroschemes










6.3.4. Electromagnetic switch (selector) of a forward axis

GENERAL INFORMATION

Electromagnetic switch of the forward bridge

1. Aktyuator
2. Position switch of the forward bridge
3. Position switch of a demultiplicator
4. ECU block
5. Control lamp
6. The switch of a forward axis on the handle of the lever of a transfer case
7. The blocking switch
8. Movement speed sensor

The electromagnetic selector provides inclusion of a forward axis by means of the switch, mounted on the handle of the lever of a transfer case. Also processor control unit (ECU), an aktyuator, the position switch of the forward bridge, the demultiplicator L4 switch (a low gear of a transfer case) blocking the switch (on and/m with automatic transmission), the sensor of speed of the movement and the control lamp of inclusion of both bridges brought to a guard of devices (see rice are a part of the electromagnetic selector. Electromagnetic switch of the forward bridge).

Some knots and details of the selector can be checked and replaced independently. The ECU block is checked in car service.